Advanced Settings
53
Telstra Pre-Paid 4G My Pocket Wi-Fi Ultimate
protection for the rest of the network, and sending all incoming data to a particular IP
address.
To enable DMZ and designate a computer to screen incoming traffic:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Enter
http://m.home
or
http://192.168.1.1
.
A login screen displays.
3.
Enter the administrator login password.
The default password is
admin
. The password is case-sensitive.
4.
Select
Settings > Router > Basic
.
5.
In the DMZ section, select the
On
radio button next to DMZ Enabled.
6.
In the
DMZ Address
field, enter the IP address of the computer to which you want all data
sent. If the hotspot is tethered using a USB cable, this address is 192.168.1.4. If the hotspot
is connected using Wi-Fi, the first Wi-Fi client’s IP address is usually 192.168.1.74.
The
Submit
button displays after you make a selection.
7.
Click the
Submit
button.
