21
value in the
Percentage
value box you’ll see that the
Target Re-
sult
field changes accordingly.
Before you start training the subject, make sure that the train-
ing parameters are correct. Tap on the
Parameters
button to
open the parameter editor shown in Figure 35.
Set the
Distance
parameter to 10 (assuming that you still have
the photocells 10 meters apart), split times to 0 and exit the
parameter editor by tapping the
OK
button.
As the subject sprints through the photocells, the
Current Result
field will show the results made by the subject and the
Differ-
ence
field will show the difference to the original result. Neg-
ative values mean that the subject was slower than the
Target
Result
and positive values mean the opposite. If you change
the
Percentage
, the
Difference
field will also change, so locat-
ing the
Difference
that is closest to zero will show you the actu-
al percentage the subject did in her training sprint.
All training results made within the current training view are
added to the
Results
selector so you can browse them while
training. When you exit the
Training
view by pressing the
Exit
button, all training results will be removed from the system.
Figure 35
Added a new session to
Session Manager