12
13
The
Edit Session
view is used to enter the
Name
and
Com-
ments
for the new session. The
Name
of the session is manda-
tory but the
Comments
are optional and can be left blank. Af-
ter typing, select the
Edit Group/Teste
r action from the action
selector. This allows you to choose the
Test Group
for the ses-
sion and enter the name of the person responsible for this ses-
sion. The
Edit Group/Tester
view is shown in Figure 16.
The
Tester
is optional, but a session must be associated to a
group before testing can be started. When the session gets as-
sociated to a group, any member from the group can be se-
lected as a subject for a test. Non-members will not be availa-
ble for testing within this test session.
Figure 15
Edit session
view
Figure 16
Edit group/tester
view
After the group is selected, press
Save & Exit
and you will re-
turn to the
Edit Session
view. If the
Name
and
Comments
are
satisfactory, pressing
Save & Exit
again saves the new session
and returns to the
Session Manager.
The new session is now
visible in the list of sessions as shown in Figure 17.
If you made a mistake when creating the session, you can go
back to the
Session Editor
and correct the mistake by select-
ing the session from the sessions list, choosing the
Edit Session
action from the action list of
Session Manager
and tapping
the
Do Action
button. After you have corrected the mistake,
tapping on the
Save & Exit
button of
Session Editor
saves the
changes made to the session and returns you to
Session Man-
ager
.
3.2 Starting a test
To start a test, select the
Start Tests
action from the
Session
Manager
and tap the
Do Action
button. This enters the
Test
Manager
view shown in Figure 18.
Test Manager
contains a
list of all tests that can be performed. In this example the jump
test
Drop Jump
will be performed.
Figure 17
Added a new session to
Session Manager
TE
ST
IN
G
3
