Use the [<] or [>] keys to bring your choice to the display and then press the
appropriate [F] Key to select your choice. For example pressing [F1] for kilopascal.
Once your unit of measurement is selected you can press [MENU]
000.1 KPA
unt
zro
peak
set
Your display should revert back to your basic functions
With
no pressure applied
, the display should read zero, if not, press [F2] to
automatically adjust the zero.
000.0 KPA
unt
zro
peak
set
Once the UniMano is zeroed you may apply pressure and the display will accurately
show the actual pressure applied in your selected unit of measurement.
2.4 PEAK
OPERATION
If your input pressure is variable and you wish to see the highest value obtained over
a period of time simply press [F3] or peak. On the display the function “peak” will
continually flash while in peak mode.
While in “peak mode” the display will only display the highest value seen, lower
value will not be displayed.
Simply press [F3] again and the flashing will stop and the display will return to real
time measurements.
Warning
Reverting to real time from peak will result in loss of peak pressure reading. Record
the peak value prior to returning to normal real time reading.
UniMano 1000 Series
11
