2.3 NORMAL
OPERATION
Press the ON/OFF to activate the UniMano 1000. On startup the microcontroller will
initiate a self check, beep and briefly display the Model and Version of software.
UniMano UM5000
100PSI
Ver 2.0
The display will then revert to:
00.00 PSI
unt
zro
peak
set
Allow two minutes for the transducer to warm up and stabilize.
The top line is your measurement line and the second line is your select function line.
Press an [F] key to select which function you wish.
unt:
Different Units of Measurements
zro:
Zeroing the display
peak: Peak value capture
set:
Alarm and Leak Detection
The 800-2000 will turn on in the mmHG unit of measurement, while both the 800-
4000 and 800-5000 default to the PSI unit of measurement.
To select another engineering unit to be displayed simply press [F1] and the display
will show the various units of measurements available.
< 00.00 PSI >
Kpa
iHg
psi
Kgc
Kpa:
KiloPascal
iHg:
Inches of Mercury
psi:
Pounds per Square Inch
Kgc: kilogram-force/square
centimeter
mmHg: millimeters of Mercury
iHo:
inches of Water
mBr: milliBars
cHo:
centimeters of Water
UniMano 1000 Series
10
