| Industrial
IoT
10
1. For USB port communication, you must install a driver compatible with the
NTC-100 serial modem’s embedded Quectel BG96 cellular module. The
Windows drivers are available from the NTC-100 serial modem product page
on the NetComm Wireless website (www.netcommwireless.com/product/
m2m/ntc-100).
2. After the download has completed, install the driver by double-clicking on the
downloaded file and following the installer prompts.
3. Open the
Control Panel
and then
Device Manager
. The NTC-100 serial
modem appears under
Ports
with three Quectel USB entries.
The COM port used for each port is displayed in brackets next to each port type.
For terminal access, take note of the COM port assigned to the
Quectel USB
AT Port
. In the screenshot above, it is COM11. For further instructions, see the
Accessing the NTC-100 via terminal emulator
section of this guide.
