Chapter 3. Installation
15
Configure WDS Settings
1)
Click on the
WDS
menu item.
2)
Select
WDS Configuration
submenu item.
3)
Setting WDS link parameters
By default, WDS profiles are disabled. First, choose the WDS Profile; enable WDS; supply peer’s
MAC
address
and
security type
.
Configure the Peer
The WDS peer’s setting should be configured while completing the WDS configuration. To configure the peer,
repeat the above WDS steps except for the last step that the MAC address information comes from the first WDS
station.
Obtain WDS List Status
1)
Select the menu of
Status
.
2)
Select
WDS
List submenu.
3)
Check the signal strength of WDS link.
Check the
SNR
of WDS link after clicking
Status / WDS List
, there should be SNR displayed; If the SNR is
shown as N/A, the wiring and the above configuration should be checked again.
