NP3680 User Guide
YML838 Rev
codepage. For example, if your Windows codepage is Traditional Chinese, you have to select Traditional
Chinese (Big5) in the Server. Please refer to the chapter “File Server”.
•
TCP/IP:
You have to set the Server’s TCP/IP configuration to connect TCP/IP network. Please see the
chapter on Basic Installation for more details.
•
Supported Protocols:
The Server supports the following TCP/IP protocols:
TCP/IP
•
Enable LPR (Line Printer Remote) Printing:
select or clear Enable LPR Printing support. It is enabled in
Factory Default.
•
Enable IPP Printing:
select or clear Enable IPP Printing support. It is enabled in Factory Default.
•
Enable Raw TCP Printing:
select or clear Enable Raw TCP Printing support. It is enabled in Factory
Default and users may set the protocol’s TCP ports as following boxes: - TCP Port 1: set TCP port for
the printer of USB1 port (default: 9100) - TCP Port 2: set TCP port for the printer of USB2 port (default:
9101)
•
Enable SMB/CIFS Print/File Server:
select or clear Enable SMB/CIFS Print/File Server support. It is
enabled in Factory Default. - Enable Internet Access: select or clear Enable Internet Access support.
If you clear the item, you do not allow that users can access your SMB/CIFS server via Internet. If you
select the item, you allow Internet users can access your storage using the SMB/CIFS protocol. - Enable
Server Authentication: select or clear Enable Server Authentication support. Select the item, if you want
to share your storage or printer with user level security which requires user name and password to login.
If you clear the item, your storage will be shared without security.
•
Enable FTP Server:
select or clear Enable FTP Server support. It is enabled in Factory Default and users
may set some parameters as follows:
-
FTP Port:
Enter an integer number to set FTP server’s TCP port (default: 21)
-
Set Maximum Session Number:
select or clear Set Maximum Session Number support.
You can limit the FTP session number by selecting the support and enter an integer to set
the allowable maximum session number. If you clear this field it means that FTP server will
have no limitation in session number.
-
Set Passive Mode:
select or clear Set Passive Mode support that FTP server can accept
passive mode.
-
Enable Server Authentication:
select or clear Enable Server Authentication support. If you
select the support, you need to enter user name and password to login to the Server. If you
clear the support, you do not need user name and password to enter the Server.
-
Allow Anonymous Login:
select the item, if you want to allow the user “anonymous”
to login to your FTP server with Read-Only permission and FTP server will not check the
password. If you clear the item, your FTP server will not support anonymous login function.
•
Enable SANE (Scanner Access Now Easy) Server:
select or clear Enable SANE Server support. It is
enabled in Factory Default and users may set the TCP port as follows:
-
SANE Port:
set SANE server’s TCP port (default: 6566)
•
Enable UPnP (Universal Plug and Play):
select or clear Enable UPnP support. It is enabled in Factory
Default.
