www.netcomm.com.au
41
NetComm NB304N – ADSL2+ Wireless N300 Modem
YML304X
Enter the following parameters:
PARAMETER
DEFINITION
Group Name
Enter a name to identify the interface group
WAN Interface used
Select which WAN interface to use for the group
Available Interfaces
Select which LAN interfaces will be used by the group
DHCP Vendor IDs
Enter specific Vendor IDs to identify devices to automatically take part in the group
Click Apply/Save to save the Interface grouping configuration settings.
IPSec
The NB304N offers IPSec VPN tunnel functionality.
To delete an IPSec entry, click the Remove checkbox next to the selected IPSec tunnel entry and click Remove.
Click Add to create a new IPSec tunnel connection.
Enter the following parameters:
PARAMETER
DEFINITION
IPSec Connection Name
Enter a name to identify the IPSec tunnel
Tunnel Mode
Select the applicable IPSec tunnel mode
Remote IPSec Gateway
Enter the IP Address of the IPSec server to connect to
Tunnel access from Local
Select which remote addresses local IPSec connections are able to access
IP Address from VPN
Enter the IP Address to be used locally for the IPSec tunnel
Subnet mask for VPN
Enter the subnet mask to be used locally for the IPSec tunnel
Tunnel Access from Remote
Select which local addresses remote IPSec connections are able to access
IP Address for VPN
Enter the IP Address to be used on the remote end for the IPSec tunnel
Subnet mask for VPN
Enter the subnet mask to be used on the remote end for the IPSec tunnel
Key Exchange Method
Select the type of IPSec exchange is to be used on the IPSec tunnel
Authentication Method
Select the applicable authentication for the IPSec tunnel
Pre-Shared Key
Enter the pre-shared key (if applicable) to grant access to the IPSec tunnel
Perfect Forward Secrecy
Select to use Perfect Forward Secrecy during key exchange for the IPSec tunnel
Advanced IKE Settings
Configure advanced IKE settings for the IPSec tunnel such as the encryption method or key life time
After entering the required IPSec tunnel service settings, click Apply/Save to save the new IPSec Tunnel configuration settings.
