1. Attach the supplied antenna to the circular antenna port on the back of the
NetComm 3G18WV (this should be attached onto the port in a clockwise
direction).
2. Connect a compatible 3G USB Modem to the “3G USB” port on the front of the
NetComm Router.
Please note: You can also connect an Ethernet cable from your ADSL/Cable modem’s LAN port to your 3G18WV’s WAN port for fixed line connections.
3. Connect the power adapter to the power socket on the back of the NetComm
3G18WV.
4. Plug the power adapter into the wall socket and switch on the power.
5. Wait approximately
60 seconds
for the NetComm 3G18WV to power up.
1
Hardware Installation
USB Modem
Power Point
Power Connector
