Front Panel
The router has been designed to be placed on a desktop. All of the cables exit from
the rear for better organization. The LED indicator display is visible on the front of the
router to provide you with information about network activity and device status. See
below for an explanation of each of the indicator lights.
Front Panel
Icon
Description
WWW
Lights up when the router is connected to the internet via a fixed line WAN
LAN 1—4
Solid green light when LAN connection is established. Blinks on LAN port traffic
Power
Illuminates to indicate the router is powered on
3G
Solid green light when the router is connected via 3G, blinks on traffic
Phone
Solid green light when you are logged into your VoIP service
Blinks on incoming or active call
Wireless
Solid green light when WLAN is enabled. Blinks on traffic (data transfer)
3G USB port
Insert your 3G USB modem stick here.
Reset button
By using a paper clip, hold this button down for more than 10 seconds to reset to
factory defaults
WPS button
Hold and release this button in under 10 seconds to enable the WPS push-button
connect function
Please note: When performing a firmware upgrade, all the lights will flash to indicate the upgrade is in progress.
