NetComm Wireless NWL-12 Series, User Manual

Page: 60 / 126

60
NetComm Wireless 3G Light Industrial M2M Router www.netcommwireless.com
Figure 65 - OpenVPN P2P mode settings
4. Use the
Server
port field to select a port number and then use the drop down list to select a packet type to use for the OpenVPN server. The default OpenVPN port is 1194 and
default packet type is UDP.
5. In the
Local IP Address
and
Remote IP Address
fields, enter the respective local and remote IP addresses to use for the OpenVPN tunnel. The slave should have the reverse
settings of the master.
6. Under the Remote network section, enter the network
Address
and network
Subnet mask
. The Network Address and Network Mask fields inform the Master node of the LAN
address scheme of the slave.
7. Press the Generate button to create a secret key to be shared with the slave. When the timestamp appears, you can click the Download button to save the file to exchange with the
other router.
8. When you have saved the secret key file on each router, use the
Browse
button to locate the secret key file for the master and then press the
Upload
button to send it to the slave.
Perform the same for the other router, uploading the slave’s secret key file to master.
9. When they are uploaded click the
Save
button to complete the peer-to-peer OpenVPN configuration.