Certifications
Marking of this equipment with the symbol CE
indicates compliance with European Council
Directive 89/336/EEC - The EMC Directive as
amended by 92/31/EEC and 93/68/EEC.
To maintain compliance with the limits and
requirements of the EMC Directive it is required to use
quality interfacing cables and connectors when
connecting this device. Refer to the cable specifications
in the Hardware Guide for selection of cable types.
This device meets or exceeds the requirements of the
following standard:
EN 61326:1997 including amendment A1:1998 -
"Electrical equipment for measurement, control and
laboratory use - EMC requirements.”
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
This equipment is neither designed for, nor intended for
operation in installations where it is subject to hazardous
voltages and/or hazardous currents.
Note:
Warning!
Caution!
Cables
The NetMeter is designed for use with the supplied
cables or the following Brad Harrison replacement
cables:
DND-21A-M010
DND-22A-M010
26