How to use this manual
This is a reference manual for the DeviceNet NetMeter
(DN-MTR). For each NetMeter switch position you will
find a page explaining the measurements available, and
suggested actions and/or remedies if your network is not
healthy.
On each page you’ll find:
The minimum shield
voltage recorded
since the NetMeter
was plugged in or
reset is -3.5V.
x1
V
250
MIN
x5
Displays the
maximum frame rate
per second on the
network since the
NetMeter was
plugged in or reset.
LCD display
# of times to push the advance button after moving
the selector switch to display this measurement.
Description
Push the Advance
button
You can view this measurement for each active
device by pressing the
or
buttons.
Pressing
and
at the same time displays
the overall network measurement again.
The measured value
exceeds the positive or
negative input range.
No measurement taken
(see additional details for
specific measurements).
Special Conditions:
Sign indicates negative over-range
/S
250
MAX
K
AUT
OSEARCH
3
MAC
Viewing measurement
for this device (MAC ID)
