NET 3iCUBE User Manual Download | Manualshive

Page: 2 / 58

background image

2 / 58

2

Before You Start

This manual should help you in installation and setting of the camera and we recommend you to
carefully follow the instruction described.
To ensure that your warranty remains valid, read the manual carefully before using the camera.
DO NOT disassemble, modify or repair the camera since there is no user serviceable part inside and
may void warranty. For prevention of fire or electric shock DO NOT remove screws or cover from the
camera.
Operation in wet environment is NOT recommended and camera SHOULD NOT be exposed to rain or
moisture. For long life and use of camera’s CCD, do not point the camera directly to the sun or strong
spotlight which may result CCD blooming and permanent damage. DO NOT operate camera beyond
operation temperature range stated and AVOID usage in conditions exceeding 90% humidity.
DO NOT use unregulated power supply source to prevent camera’s circuit damage.
Use soft materials such as lens tissue or cotton tipped applicator with ethanol for CCD faceplate
cleaning ONLY when necessary and AVOID contact with fingers or any hard object. Do not use solvent,
abrasives or detergent in case of cleaning camera body.
Warranty shall be voided for improper usage or fault caused by user or damage caused by other
equipments due to negligence

Warranty

NET GMBH warrants the original components free of defects for one year from purchase date. This
warranty covers failures and damage due to defect which may occur during normal use. It does not
cover damages or failure resulting from mishandling, abuse, misuse or modification. For every repair
or replacement, RMA numbers must be obtained in advance.

Disclaimer

The information in this document has been carefully checked and is believed to be reliable. However,
no responsibility is assumed for inaccuracies, nor is any responsibility assumed by NET GMBH. There
is no legal obligation to documenting internal relationships in any functional module of its products,
which is realized in either hardware or software.

Copyright

All the materials in this document are protected by copyright and other laws for intellectual property.
They are not allowed to be copied, reproduced or modified for any use without the permission of NET
GmbH. NET GMBH reserves the right to make changes in specifications, functions or designs at any
time and without any notice. The company names in this document may be the trademarks and
trade-names of their respective owner and are hereby acknowledged.
Copyright © 2014 NET GMBH. All rights reserved.

«
1
2
3
4
...
»

Summary of Contents for 3iCUBE



























































Reviews:

No comments

Related manuals for 3iCUBE

Univerge SV8100

Brand: NEC Pages: 5

Brand: FALEEMI Pages: 14

CAMEDIA C-60 Zoom

Brand: Olympus Pages: 2

Brand: Canon Pages: 132

CAMEDIA C-5500 Sport Zoom

Brand: Olympus Pages: 2

FE 370 - Digital Camera - Compact

Brand: Olympus Pages: 70

FE 370 - Digital Camera - Compact

Brand: Olympus Pages: 70

Brand: Olympus Pages: 68

Brand: Abocom Pages: 1

FINEPIX F200 EXR

Brand: FujiFilm Pages: 135

PF-8DN-283V3RTC

Brand: Clas Ohlson Pages: 80

Brand: ViewSonic Pages: 2

Brand: Speco Pages: 3

Brand: Q-See Pages: 22

Brand: Mikrotron Pages: 85

Brand: Conrad Electronic Pages: 4

Brand: Laser Pages: 8

Brand: Genius Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands