12 / 58
12
Usage Notes
Read the documentation
Read the camera documentation before using the camera.
Camera power
Incorrect input power can damage the camera. Do not reverse power polarity. Do not connect or
disconnect other cables when the camera power is on. Use always a USB 3.0 cable as power supply
supported by USB 3.0 port.
Opening the camera
Do not open the camera. Do not let liquid, dust, flammable or metallic material to get inside the
camera.
Environmental storage conditions
Temperature:
-20°C ~ 60°C
(-
4°F …. 140°F)
Humidity:
90% or less (no condensation)
Environmental operating conditions
Always use the camera in conditions meeting the specification in this chapter. Do not use the product
in locations where the ambient temperature or humidity exceeds the specifications. In a thermal
challenging environment the customer needs to ensure sufficient heat dissipation with a thermal
connection to the bottom of the camera housing and sufficient airflow.
Non adequate thermal connection may increase heat induced noise or degrade image quality in other
ways and internal components may be adversely affected up to camera outages due to overheating.
Temperature
Range
Measurement
Environmental
0°C ~ 45°C
(32°F …. 113°F)
close to the camera case
Camera housing
≤ 50°C
at camera case
Humidity
Relative
Environmental
20 %–90 % non-condensing
The conditions for shock and vibrations are
on request
by NET.
Maintenance
Turn off power to the equipment and wipe it with a dry cloth. If it becomes severely contaminated,
gently wipe the affected areas with a soft cloth dampened with diluted neutral detergent. Never use
alcohol, benzene, thinner, or other chemicals because such chemicals may damage or discolor the
paint and indications.
