background image

To the Owner 

•    Some electronic devices, such as the electronic system of vehicles, are susceptible to electromagnetic 

interference sent by your device if inadequately shielded. Please consult the manufacturer of your device 

before using if necessary. 

•    Operating your device may interfere with medical devices like hearing aids and pacemakers. Please always keep 

them more than 20 centimeters away from such medical devices when they are turned on. Turn your device off 

if necessary. Consult a physician or the manufacturer of the medical device before using your device. 

•    Be aware of the usage limitation when using your device at places such as oil warehouses or chemical factories, 

where there are explosive gases or explosive products being processed. Turn off your device if required. 

•    The use of electronic transmitting devices is forbidden in aircrafts, at gas stations, and in hospitals. Please 

observe and obey all warning signs and power off your device in these conditions. 

•    Do not touch the inner antenna area if not necessary; it will affect your device’s performance. 

•    Store your device out of the reach of little children. Your device may cause injury if used as a toy. 

•   Do not touch the metallic parts of your device when the device is operating as this may cause burns. 

Using Your Device 

•    Please use original accessories or accessories that are authorized. Using any unauthorized accessories 

may affect your device’s performance, and violate related national regulations about telecom terminals. 

•   Avoid using your device near or inside metallic structures or establishments that can emit electromagnetic 

waves; it may influence signal reception. 

•    Your device is not waterproof. Please keep it dry and store in a shady and cool place. 

•    Do not use your device immediately after a sudden temperature change. In such case, it will produce 

moisture inside and outside your device. Wait until it becomes dry. 

•    Handle your device carefully. Do not drop, bend, or strike it; your device may get damaged. 

•    No dismantling by non-professionals and only qualified technicians can undertake repair work. 

•    An operating temperature range of 14°F - 140°F (-10°C - +60°C) and humidity range of 5% - 95% are 

recommended. 

Battery Handling 

•   Do not short-circuit the battery, as this can cause excessive heat and fire. 

•   Do not store battery in hot areas or dispose of it in a fire, as this can cause an explosion. 

•   Do not disassemble or modify the battery. 

•   When not using the battery for a long period, remove it from your device and store it in a cool, dry place. 

•   Never use a damaged or worn-out charger or battery. 

•    Return the worn-out battery to the provider or put it in an approved recycling container. Do not put it in 

your regular house trash. 

 WARNING!  If the battery is broken, keep away from it. If it touches your skin, wash your skin with 

abundant fresh water and ask a doctor for help if necessary. 

Limited Warranty 

•    This warranty does not apply to defects or errors in the Product caused by: 

  i.    Reasonable  abrasion. 

  ii.   End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. 

  iii.   End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing 

or operation of the Product. 

  iv.   Modifications or repairs not made by ZTE or a ZTE-certified individual. 

  v.   Power failures, surges, fire, flood, accidents, actions of third parties or other events outside ZTE’s 

reasonable control. 

  vi.   Usage of third-party products, or usage in conjunction with third-party products provided that such 

defects are due to the combined usage. vii. Any other cause beyond the range of normal usage 

intended for the Product. 

•    End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE 

under the above-mentioned situations. 

•    This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and 

is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied 

warranties of merchantability and fitness for a particular purpose, unless otherwise required under the 

mandatory provisions of the law. 

Limitation of Liability 

ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting 

from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew 

or should have known of the possibility of such damages, including, but not limited to lost profits, interruption 

of business, cost of capital, cost of substitute facilities or product, or any downtime cost. 

Radio Frequency (RF) Energy 

This model device meets the government’s requirements for exposure to radio waves. This device is designed 

and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the 

Federal Communications Commission of the U.S. Government: 

The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption 

Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating 

positions accepted by the FCC with the device transmitting at its highest certified power level in all tested 

frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of 

the device while operating can be well below the maximum value. This is because the device is designed to 

operate at multiple power levels so as to use only the position required to reach the network. In general, the 

closer you are to a wireless base station, the lower the power output. 

The highest SAR value for the model device as reported to the FCC when worn on the body, as described in 

this user guide, is 1.41 W/kg (CDMA BC1) (Body-worn measurements differ among device models, depending 

upon available enhancements and FCC requirements.) 

While there may be differences between the SAR levels of various devices and at various positions, they all 

meet the government requirement. 

WARNING: This product contains a chemical known to the State of California 

to cause cancer, birth defects or other reproductive harm. 

Summary of Contents for ZTE Z291DL














Reviews: