NET 10 ZTE Z291DL, Service Manual

Page: 10 / 13

3.2 FIND YOUR HOTSPOT SIM NUMBER
Your SIM number can be found on the red Activation Card that
came with your hotspot. If you do not have the Activation Card,
you can also find your SIM number as follows:
1. Lift the cover from the SIM card slot located on the bottom edge
of your device.
2. Push the SIM card in until it clicks and pops out a bit; then
gently slide it out. On the SIM card you will see a set of numbers
beginning with
89
. This is the SIM Number.
3. To insert the SIM card, hold the card as the image on the SIM
card cover indicates, making sure that the gold contacts are
facing up. Then, slide it all the way into the slot.
4. Close the SIM card cover.
3.3 FIND YOUR HOTSPOT PHONE NUMBER
Once your device has been activated, you can find the hotspot’s phone
number on the device website http://192.168.1.1 by selecting:
• From a computer: Information tab.
• From a mobile device:
Basic Status
.
Your hotspot’s phone number appears next to
My Phone Number
.
Please write down your phone number as you will need it for future
transactions.
3.4 SECURITY SETTINGS
By default, your Hotspot allows others to connect to your network.
To password protect your device:
1. Go to the hotspot website from your computer or mobile device
by entering http://192.168.1.1 . Your hotspot must remain ON
during this process.
2. Enter the password.
• Password can be found next to the battery (Web UI Password).
It is 12$ and the last three digits of the hotspot’s IMEI (Serial
Number). Do not leave any spaces between characters.
3. You will need to change the Encryption Type.
• From a computer: Settings > WiFi Settings > select your
desired settings > Apply .
• From a mobile device: Quick Settings > Next > Next > select
your desired Security Mode > Next > Apply .
Forgot your security password?
If you forget the password to access your hotspot, you will need to
perform a Factory Data Reset of your device. A Factory Data Reset
erases all settings and configurations and returns the hotspot to its
factory default settings. You will need to repeat the set-up process
that appears on the red Activation Card.
To limit access to your device, you will also need to re-configure
your Security Settings.