NESTOR MARTIN TQ33, Instructions Manual

Page: 108 / 120

108
C07100DB805
REMOVING THE PLEXUS (CONTROL UNIT)
IIt is possible to remove the control
unit for maintenance. This must be
carried out by a quali fi
ed technician:
> Open the door and the gate.
> Unscrew and remove the control
panel using a Torx screwdriver.
> Unscrew the 4 Torx fi xing screws
from the control unit by going through
the holes provided in the iron support
> Pull the control unit out towards the
front.
iron support grate
control unit (plexus)
control panel
To replace the glass pane
• Lift the hearth door to remove it from the hinges.
• Lay the door on a fl at surface.
• Unscrew the eight nuts on the iron door that holds
the glass pane.
• Remove the iron door from the unit.
• Replace the glass pane.
REPLACING THE Glass pane
cast iron door
glass pane
iron door