© EUROHEAT DISTRIBUTORS (H.B.S) LTD. October 2012
E & OE Instructions Part number IN1264 Edition A
19
Welcome to the World of Real Stoves
Euroheat Technical Team
Information from the Euroheat Technical Team
Euroheat and Nestor Martin have a policy of continual research and development and reserve the right to
modify its appliances without prior notice.
We make every effort to ensure that the information provided in this document is correct and accurate at
the time of printing. Continued updates occur to adapt documents to customer requirements and appliance
changes. For the latest editions of all Euroheat documentation visit our web site www.euroheat.co.uk.
We would request that you inform Euroheat of information which you feel is not provided in this document
which would assist other users in the future.
The Euroheat Technical Team
Removal of the 3 or 4 Sided Frame
The frame is secured to the body of the stove with two screws, one to the left of the plexus fascia plate and one
to the right of the ash pan door. Once these have been removed the bottom of the frame can be pulled forward
slightly then the frame lifted up from its two locating lugs from the top of the body of the stove.
To fit you reverse the procedure.
Fitting the Fresh Air Kit
1) Remove the blanking plate on the back of the stoves body.
2) Remove the 2 screws holding the air vent fins, situated left and right of the fins.
3) Remove the 6 screws holding the outer box of the stove to the base of the stove.
4) Lift the outer box from the base.
5) Fit the plexus cover plate, picture on page 7, onto the side of the inner body of the stove, covering the
plexus.
6) Fit the fresh air spigot, picture on page 7, to the rear of the stove.
7) Replace the outer box and fix in place with the 6 screws removed earlier.
8) Replace the vent fins and securing screws.
The venting kit comprises of 2 jubilee clips, 1 meter of 100mm flexible tube and the external cover vent.
Attach one end of the flexible tube with a jubilee clip to the spigot on the air duct at the rear of the stove. The
flexible tube can then be put through the wall and secured to the external vent cover with the other jubilee clip
and the vent cover secured to the outside wall.
