© EUROHEAT DISTRIBUTORS (H.B.S) LTD. October 2012
E & OE Instructions Part number IN1264 Edition A
17
Firebox Components
Removal of the Top Mica Baffle Plate
The top mica baffle is located in the top of the fire box where it sits
on the L shaped baffle support lugs which are part of the casting of
the left and right side protection plates. For easier access remove the
front fuel guard. To remove (1) slide the baffle board towards the rear
of the fire box (2) whilst lifting the rear of the board upwards. Once
the front of the board has passed the end of the L shaped support lug
(3) the front can then be dropped down and the baffle pulled down
into the main body of the fire box. It can then be angled to withdraw
it through the door.
To refit the replacement reverse the procedure.
Removal of the Upper Protection Plate
The upper protection plate is held in place by the two side protection
plates. To remove (1) lift up the plate and then (2) draw it towards
the front of the fire box.
As it is drawn forward (3) pull the front edge downwards so moving
it free of the side protection plates. It can then be angled within the
fire box to withdraw it through the door.
To refit the replacement reverse the procedure.
Removal of the Side Protection Plate
To remove (1) lift up the plate so it is higher than the lugs on the
lower side protection plates and then (2) draw it towards the centre
of the fire box.
As it is drawn towards the centre (3) twist the rear edge towards
the front of the fire box. It can then be angled within the fire box to
withdraw it through the door.
To refit the replacement reverse the procedure.
1
2
3
1
2
3
1
2
3
