nest Learning thermostat, Installation Manual

Page: 15 / 144

5. Install the Nest base
Remove the old thermostat if there is one .
You can attach the Nest base directly to the
wall or use the trim plate included to cover
up any marks .
If you’re using the trim plate, snap it onto
the base first, then screw them to the wall
as one piece .
When installed on the wall, the Nest
Thermostat should be 1 .2-1 .5 m above
the floor .
6. Connect the wires
Connect the wires coming through
the wall to Nest’s T1 and T2 terminals .
It doesn’t matter which wire goes into
which connector .
→ Continue to page 17 .
Installing it on the wall
IMPORTANT: Terminate and insulate all
wires according to the regulations in your
country or region.
EN
In
st
al
la
ti
on s
te
p b
y s
te
p •
In
st
al
lin
g t
he
T
he
rmo
st
at
15