Ness R8
- Installation and Programming Manual
20
PROGRAMMING
These phone numbers are used to report alarms in Ness Voice
Dialling format and can be programmed from User Program mode
or Installer Program mode.
It is not necessary to program a reporting format. Ness Voice Dialling
format is automatically selected when alarm reports are sent to the
Voice Dialling telephone numbers.
Voice Dialling is disabled if Central Station telephone number/s are
programmed at P70E or P71E.
PROGRAMMING SEQUENCE
1. Press:
P00E
or
P01E
• The existing telephone number is displayed.
• It is not necessary to wait for the display sequence to end. You
can interrupt the display by entering the new telephone number.
2.
[new telephone number] E
The new telephone number is displayed.
EXAMPLE
To program Voice Dialling Phone No.1 to be 03 1234 1234:
Press:
P00E 0312341234E
TO CLEAR A TELEPHONE NUMBER
To clear a telephone number, enter the MEMORY key in place
of the telephone number. E.g, to clear Voice Dialling Phone
No.2, press:
P01E MEMORY E
PROGRAM MODE LEVEL:
User, Installer, Remote by PC.
FACTORY DEFAULT:
Both Telephone Numbers =
blank.
NOTES:
These program options can
also be accessed by pressing
P0E and P1E. The leading
zero is not mandatory.
RELATED OPTIONS:
• P70E, P71E, Central Station
Telephone Numbers 1 & 2,
page 36.
• Ness Voice Dialling format,
see page 47.
• Dialling Sequence, page 47.
P00E, P01E
VOICE DIALLING TELEPHONE NUMBERS 1 & 2
SPECIAL CHARACTERS
Special characters such as Pauses, star or hash characters can be included
in a telephone number dialling sequence by using the keys in the table below.
SPECIAL
CHARACTER
KEYPAD ENTRY
KEYPAD DISPLAYS
PAUSE (1.6sec)
ARM Key
10
* (Star)
MONITOR Key
11
# (Hash)
EXCLUDE Key
12
GENERAL NOTE.
Program options P00E
to P09E can also be
accessed by pressing
P0E to P9E.
The leading zero is not
necessary.
