Ness FGR006SRB, Product Installation Manual, Page: 4 / 78

1
2.WIRING & INITIAL SETTING
2-3. Ness - IDTeck FGR006
2-3-1. Star FGR006 Connection Diagram
Wiegand ABA Track II
Beep Control
LED Control
RX-
RX+
TX- 485B
TX+ 485A
TXD
RS422 RS485 RS232
CLS
CLK
DATA
+12V DC
GND GND
Tamper SW
Input
DATA-1
DATA-0
+12V DC
GND
FINGER Error
Input
RXD
a. Caution
a. The first card presented after initialization will be registered as master card.
b. The unit shall be changed from reader mode to register mode with master card.
b. Intentional initialization (In case master card or ID is lost)
a. Unit will be initialized when all dip switch move down.
b. Unit can be initialized from S/W.
c. User Registration/Deletion
a. Change the unit to master mode with Master card.
b. Present user card which will be registered
c. If presented card has been registered already, user will be deleted instead of registration.
d. If the card is not registered, the unit requires fingerprint data.
e. Change the unit to reader mode with Master card.
- Registration Mode : Red light (upper right)
- Velification Mode : Power LED (upper left)
Blue
Brown
Yellow
Gray
Orange
White
Green
Red
Black
Purple
ON
Off
1 2 3 4 5 6 7 8
DIP S/W