3
this may damage the cable.
• Do not pull the cable over sharp edges, clamp it or allow it to hang
down. Keep the cable away from heat and moisture.
• To avoid hazards, never place the appliance on or beside hot surfaces,
for example, radiators, stove tops, gas burners or similar.
• Do not operate appliance with a damaged cord or plug or if it has
malfunctioned, been dropped or is damaged in any manner.
A damaged cord, plug or appliance can cause electric shocks, burns
and fire. Return appliance to the nearest authorized service facility for
examination, repair, or electrical or mechanical adjustment.
• Short power-supply cords reduce risks resulting from becoming
entangled in or tripping over a long cord.
• Longer (or detachable) cords may be used if care is exercised in their
use, and:
1) the marked electrical rating is at least as great as the electrical
rating of the appliance
2) a grounding-type 3- wire cord is used
3) cord (s) is arranged so that it will not drape over the counter top or
table top, where it can be pulled on or tripped over by anyone.
• If an extension lead is required, use only an earthed cable with a
conductor cross-section of at least 1.5 mm
2
/0.06 in
2
.
Avoid possible harm when operating the appliance
• Do not touch hot surfaces. Use handles, protected surfaces or knobs.
• Always keep the lid closed during preparation.
• Scalding may occur if the lid is removed during the brewing cycles.
• Extreme caution must be used when moving an appliance
containing hot liquids.
Cleaning
• Unplug appliance when not in use for a long period and before
cleaning. Allow to cool down before putting on or taking off parts,
and before cleaning the appliance. Remove the appliance from the
base before cleaning.
en
Summary of Contents for AEROCCINO4
