Nesco Solarist NC 501, User Manual

Page: 13 / 16

12
fourth time, the “min” and “C”
are red, the displayer show
“000”, you could adjust the
time by turning the knob from
1 min to 240 minutes. And this
timer is for temperature
function. After you set your
time, the time will count down
with temperature heating.
- Press the “MENU” button
fifth time, the timer will cancel,
and the product will be back
to temperature heating state.
- Press the “ON/OFF” button,
the product will be stopped,
and it will be in standby station.
- Remark : When it is in the
state of the working, take away
the pot, the alarm will sounding
after 10 seconds and it will
automatically shut off after 1
minute.
the user has not put a proper
pot in time, the induction
cooker can return to standby
automatically.
Over-Temperature Protection:
In case the temperature inside
the cooker body is too high,
the induction cooker will enter
protective mode automatically,
stop heating, and display
protection codes.
Dry-Burning Protection:
When the ceramic plate is
excessively hot or the pot
undergoes dry burning, the
induction cooker can stop
heating in a short time, enter
protective mode automatically
and show protection codes.
Over- Current or Voltage
Abnormality Protection:
When voltage is abnormal or
current changes abruptly, the
induction cooker can enter
protective mode automatically
and show protection codes.
The induction cooker will
restart the work after voltage
or current is normal.
Two-Hour
Automatic
Shutdown Protection:
Safety Protection
Detection of Small Articles:
When the pot is less than 80
mm. in diameter or small
articles (knife, fork, forceps,
key, etc.) exist or non-
magnetic pots (such as
aluminum pot) are found, the
buzzer can give out an alarm
lasting about 1 minute. In case