Nesco Solarist NC 501, User Manual

Page: 12 / 16

11
is in working or protective
mode, first press the “ON/
OFF” button to have the
induction cooker to enter
standby mode, then take off the
plug after the fan stops. This
can prolong the service life.
When not in use for a long
time, please unplug the unit.
- Avoid using great force to
strike the ceramic plate as this
may cause damage. In the
event of damage, please stop
using, and send it to a service
facility for repair.
- Never contact the control
panel with a sharp article to
prevent from any crack.
- Never use the induction
cooker on a gas stove
(magnetic lines can heat iron
parts on the stove) to avoid any
accident.
Operating Instruction
product, the product will be
shut.
- Press the “ON/OFF” button,
the product is working with
power function, and the
displayer show “2000”, you
could adjust the fire power by
turning the knob from 2000W
to 300W.
- Press the “MENU” button
first time, the “min” and “W”
are red, the displayer show
“000”, you could adjust the
time by turning the knob from
1 min to 240 minutes. And this
timer is for power function.
After you set your desired time,
the time will count down with
power heating.
- Press the “MENU” button
second time, the timer will
cancel, and the product will be
back to power heating state.
- Press the “MENU” button
third time, the product is
working with temperature
function, and the displayer
show “240
ํ
C”, you could
adjust the temperature by
turning the knob from 240
ํ
C
to 60
ํ
C.
- Press the “MENU” button
- Put the applicable pan on to
the center of the heating zone
when power cord is connected
into wall socket. The product
will sound “bee”. The displayer
showed “—”, if you
don’t press any button of the