Nesco Perfecta NC-5565, Instruction Manual

Page: 17 / 22

16
6. Switch power on and the
indicator displays “00”
7. Set up the parameters and
start up.
- Set timer (Skip this step if you
think it not necessary). Press
“Timer” once and the timer
increases by 0.5 hour. The max
time set is 24 hours and after
that it begins a new cycle.
- Select from the menu for
cooking. Press the selected
function button such as press
“Meat” for cooking and then
press “start” button, the timer
indicator and the selected
cooking indicator lights up.
- In case of a time set, the timer
begins to count down each time
by 0.5 hour. When the
countdown ends, the indicator
displays “00” and the cooker
begins to heat.
- In case of no time set, once
you select menu and press
“Start” button, the menu
indicator lights up and it begins
to heat.
- When heating and pressurizing
is over, the “Keep warm”
indicator begins to flicker
(indicating high pressure inside
the cooker). When pressure is
at normal, the “Keep warm”
indicator is in constant “light”.
- Press “Keep warm/Cancel” to
cancel parameter set or working
status.
- When no parameter set or not
in working status, press “Keep
warm/Cancel” and the “Keep
warm” indicator lights up for
on-warm status. Press once
more time to cancel the “Keep
warm” status and the indicator
goes out.
5. Put the pressure discharging
in its position, then set it to
“seal” point,Be sure that the
floating valve is in down
position (see figure 9)
- Fix the water collector see
“Fix” as figure below.