Nesco NC-5512, Instruction Manual

Page: 14 / 20

- Put the telescopic pole insert in
the base.
- Make sure the knob tight after
insert into the body.
Installations (before use)
Special Instructions
- Check the Rating information
on product, which should
match
with your local supply Voltage.
- This is a 1750 watt appliance.
To avoid a circuit overload, do
not operate a high wattage
appliance on the same circuit.
- If an extension cord is
absolutely necessary, the
marked electrical rating should
be at least as great as the
electrical rating of the
appliance. Cords rated for less
amperage may overheat. Care
should be taken to arrange the
cord so that it cannot be pulled
or tripped over.
- Do not cut or attempt to extend
the steaming hose.
Environment protection first !
- Your appliance contains
valuable materials which can be
recovered or recycled.
- Leave it at a civic waste
disposal centre.
Operating Instruction
On/off switch and indicate
lamp Description
Garment Steamer can control
by power switch. Push the on/
off switch, the power indicator
light on, the appliance start to
work. The garment steamer will
start to produce the steam. If
you working until the appliance
don’t have steam, should fill
water.
13
- Please read the instruction
carefully.
- Remove all packages from the
appliance.
- Do not power on or open
before finish assembly.