Nerival NEO-80, User Manual

Page: 12 / 15

12
www.nerival.fi
Settings
Press the
▲
button to enter the setting mode.
Use the
▲
and
▼
buttons to select the setting you want to set.
Press the decrease or increase button to set the desired value.
To save the setting and exit the setting mode, press the
button.
General settings 1-22
Setting
number
Function
Setting
range
Factory
setting
Additional information
1 Opening speed 0-30 25
The higher the value, the faster the
door opens
2 Closing speed 0-30 20
The higher the value, the faster the
door closes
3 Opening angle 0-99 45
The higher the value, the larger the
opening angle
4 Door hold open time 0-30 2
0-30 seconds opening time after the
door has opened
5 Slow opening angle 0-30 8
The higher the value, the greater the
angle at which the door opens slowly
6 Slow closing angle 0-30 8
The higher the value, the greater the
angle at which the door closes slowly
7 Closing force 0-10 8
The higher the value, the greater the
closing force
8 Type of electric lock 0-3 0
0: magnetic lock
1: electric lock
2: fail safe electric strike
3: fail secure electric strike
9 Opening direction 0-1 0
0: left
1: right
10
Adding a remote
control
0-40 0
see Adding a remote control
Additional controller e.g.
Nerival #33340 RCT-1224
11
Opening door anti-
collision delay
0-10 8
The lower the delay, the faster the
door stops in a collision
12
Closing door anti-
collision delay
0-10 8
The smaller the delay, the faster the
door opens in a collision
13
Closing speed after
reset
0-10 0 Closing speed after reset
14 Low speed 0-10 0 Minimum deceleration speed
15 Unlock delay 0-0 0
The lock is released first, after which
the door opens after a set delay of 0
seconds
16 Push / pull to open 0-1 0
0: off
1: on
17 Remote control mode 0-1 0
0: Buttons have different functions
1: All buttons open the door
18 Force to keep open 0-10 0
0: minimum
10: maximum