Saturn B/M Enhanced Functions – Chapter 1. Introduction
1.3
General
The Saturn M/B terminals provide the following access levels in
addition to USER (1) level and OPERATOR (2) level:
•
RENTER (3)
, and
•
OWNER (4)
The RENTER and OWNER levels are protected by passwords.
The default password for both levels is
1 2 3 4 5 6
.
Password protection can be used to restrict operative functions to
different parameter levels, e.g.:
•
level 4 (OWNER) allowed to change setup.
•
level 3 (RENTER) allowed to read data.
•
level 2 (OPERATOR) given no access to reading or setup.
•
level 1 (USER) has standard minimum operational functions.
These restrictions can be applied according to function, e.g.:
The RENTER level can be allowed to configure the traffic log, but
restricted to reading only in the access code function.
An individual password may be assigned to each level using the "SET
PASSWORD" function no.13, see "
Password
".
To Set Access Level:
1
Select
SET USER
LEVEL
function (
12
):
2
Display the current level:
3
Key in operator level ref. number,
e.g. 3 (RENTER):
3=RENTER, 4=OWNER
4
Key in the current password for this
level (the default password
is
1 2 3 4 5 6
):
5
The terminal is now set to
RENTER LEVEL
:
This level is active until a new level is set or the
terminal is switched off. Therefore, set the level
back to
USER
when finished with your operations.
and revert to IDLE:
Renter/Owner Level
ON
SET USER
LEVEL
12
ENTER
FUNC
ON
LEVEL:
USER
1
ABC
ENTER
2
DEF
PLAY
ON
LEVEL:
?
3
GHI
ENTER
ON
LEVEL:
RENTER
ON
PASSWORD
?
ENTER
ESC
3x
2
DEF
PLAY
1
ABC
6
PQR
4
JKL
5
MNO
3
GHI
Renter/Owner Level
