EnergyBar 832 - User Guide
Page 1
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
WARNING
– To guard against injury, basic safety precautions should
be observed, including the following:
•
DANGER
–
To avoid possible electric shock, special care should be taken since
water is employed in the use of aquarium equipment. For each of the following
situations, do not attempt repairs by yourself; return the EnergyBar 832 to
Neptune Systems or an authorized service facility for service, or discard the
EnergyBar 832:
o
If the EnergyBar 832 falls into the water, DON’T reach for it! First unplug
it and then retrieve it.
o
If electrical components of the EnergyBar 832 get wet, unplug the
EnergyBar 832 immediately. Carefully examine the EnergyBar 832 after
installation. It should not be plugged in if there is water on parts not
intended to be wet.
•
Do not operate any EnergyBar 832 if it has a damaged cord or plug, or if it is
malfunctioning or has been dropped or damaged in any manner.
•
Always unplug an EnergyBar 832 from an outlet when not in use, before
putting on or taking off parts, and before cleaning. Never yank cord to pull
plug from outlet. Grasp the plug and pull to disconnect.
•
Do not use an EnergyBar 832 for other than intended use. The use of
attachments not recommended or sold by Neptune Systems may cause an
unsafe condition.
•
Do not install or store the EnergyBar 832 where it will be exposed to the
weather or to temperatures below freezing.
•
Close supervision is necessary when this or any appliance is used by or near
children.
•
Read and observe all the important notices on the EnergyBar 832.
SAVE THESE INSTRUCTIONS
