EnergyBar 832 - User Guide
Page 9
ENERGYBAR 832 CIRCUIT BREAKER
The 15 Amp circuit breaker is located inside the EnergyBar 832; a yellow status/reset
button is visible on the rear of the EB832.
The yellow button will normally protrude from the back of the EB832 case by
approximately 1.5-2mm. If the circuit breaker has been tripped, the yellow button will
extend farther out, approximately 3mm. This may be seen in the images below.
Normal
Tripped
To reset a tripped circuit breaker, press the yellow button inward. Before resetting the
breaker, identify and resolve the cause of the overload condition which resulted in the
circuit breaker being tripped.
