Practical Multi-Purpose Utility Pump – User Guide
Page 5
CAUTION: The PMUP is intended for use in relatively clean water. It must not
be used in an area where sand or other debris could be drawn into the PMUP. If
sand or other hard debris enters the pump, it may fail; this will not be covered
under warranty.
The PMUP is intended for submerged use at the bottom of a water
vessel such as a sump chamber, an ATO reservoir, a 5-gallon jug,
or in a barrel. The PMUP will fit through the bung hole of most
barrels & drums, and through the opening in many wide-mouth
water jugs.
POWER CONNECTION
Connect the PMUP power cable to either one of the DC24/ACC ports on an Energy Bar 832
or a 1LINK module.
