Practical Multi-Purpose Utility Pump – User Guide
Page 3
PMUP – INTRODUCTION
The PMUP is a 24VDC fixed-speed submersible multipurpose pump that can be used for
many different tasks on your aquarium. The PMUP directly connects to the DC24 accessory
ports on either the 1LINK module -OR- the DC24 ACC ports on the new Energy Bar 832. Its
most popular uses will be:
•
Automatic Top-Off (ATO)
•
Carbon reactors
•
GFO reactors
•
Biopellet reactors
•
Many other salt or freshwater uses
The specifications of the PMUP are:
•
24VDC
•
17 watts power consumption
•
100GPH @ 0 head
•
14 feet maximum head
•
Dimensions – 4.58″ x 2.24″
•
Power cable length: 6.5’ / 2m
The PMUP is intended as an accessory for use with any Apex aquarium controller equipped
with either an Energy Bar 832 or a 1LINK module. An Apex and an EB832 -or- an Apex
and 1LINK module are required.
An optional 10’ / 3m extension cable is available; the Neptune Systems part number is
CBL-DC24-EXT.
PLUMBING YOUR PMUP
The output tube of the PMUP is 3/8” in diameter, and may be used with 3/8” quick
disconnect fittings or 3/8” ID flexible tubing. Tubing and quick-disconnects are not
included with the PMUP.
Neptune Systems recommends the use of quick-disconnect fittings (3/8”-3/8” female-
female or 3/8”-1/4” female-female) and polyethylene tubing (commonly called RO/DI
tubing in the hobby) or polyurethane tubing as illustrated here:
