Neoway N11 V2 At Command Manual Download Page 40

Page: 40 / 134

N11 V2

AT Command Manual

Remarks



This command can be used in the transparent transmission of external/internal
protocol stack and CSD function.



This command should not end with \r or \n.

4.4 Switching Command Mode to Data Mode: ATO

Description

To switch the module from the command mode to the data mode

Format

ATO<CR>

Parameter

N/A

Return Value

CONNECT

CONNECT <text>

NO CARRIER

ERROR

Example

ATO

CONNECT

CONNECT

is returned in TCP/UDP transparent transmission

mode and TCP server transparent transmission mode.

ATO

is returned after the mode is switched to data mode

successfully in external protocol dialing.

ATO

CONNECT 9600

CONNECT 9600

is returned after the module is switched to

data mode successfully during the operation of CSD function.

ATO

ERROR

ERROR

is returned because no transparent transmission link

is set up or no external protocol is used for dial-up internet
access.

Remarks



This command is used to switch the command mode to the data mode for dial-
up connection through external protocol stack and transparent transmission
through internal protocol stack.



Commands mode is switched to data mode during the operation of CSD
function.

4.5 Setting Network APN: +NETAPN

Description

To set the network APN

Summary of Contents for N11 V2







































































































































Search results

Summary of Contents for N11 V2

Reviews:

Related manuals for N11 V2

Brands by name

Popular brands

Neoway N11 V2, At Command Manual

Search results

Summary of Contents for N11 V2

Reviews:

Related manuals for N11 V2

Brands by name

Popular brands