N11 V2
AT Command Manual
Copyright © Neoway Technology Co., Ltd
120
is sent successfully.
The current coordinates of latitude and longitude are valid and precision is
reserved (0.0 by default).
If the positioning request is not responded for long time, close the request and
initial it again later.
18.6 Updating BS Time: +GLTS
Description
To update the module time to BS time
Format
AT+GLTS=<mode><CR>
AT+GLTS?<CR>
AT+GLTS=?<CR>
Parameter
<mode>:
0: Forbid updating to BS time
1: Allow updating to BS time
Return Value
See the Example
Example
AT+GLTS=0
OK
Forbid updating to BS time
AT+GLTS=1
OK
Allow updating to BS time
AT+GLTS=?
+GLTS: (0-1)
OK
Query the parameter value range.
AT+GLTS?
+GLTS: 1
OK
Query the current settings.
Remarks
The parameter settings will not be saved after the module is powered off.
After allowing updating to BS time is set, the BS proactively issues time, i.e.
+GLTS: 15/06/25,18:38:13/GMT+08, to the module after the module powers
on.
After updating to BS time, send
AT+CCLK?
to check if RTC time is the current
BS time.
If module time is not updated though allowing, the current BS registered does
