Neoway N11 V2 At Command Manual Download Page 124

Page: 124 / 134

N11 V2

AT Command Manual

116

+UPDATETIME: Update To 2014-03-31,11:32:55

East time zone 8 by default

No DST

Time

updated

successfully.

AT+UPDATETIME=1,time.windows.com,10,"W12",1

Time Updating,Please Wait...

+UPDATETIME: Update To 2014-04-12,15:17:48

Update time to that of
time.windows.com.

Timeout period is 10
seconds.

Select west time zone 12.

Select DST.

Time

updated

successfully.

AT+UPDATETIME=1,128.138.141.172,10,"W12",1

+UPDATETIME: Send Request Fail

Time

update

request

sending fails.

The reason probably is bad
network

connection

inability to support time
update.

AT+UPDATETIME=1,time.windows.com,10,"W12",1

+UPDATETIME: Domain Name Invalid

The domain name is
invalid.

The

possible

reason is the SIM (USIM)
card is out of credit.

AT+UPDATETIME=1,time.windows.com,10,"W12",1

+UPDATETIME: Socket Error

Socket error.
The possible reason might
be network congestion.

AT+UPDATETIME?

+UPDATETIME: 128.138.141.172,10, "E8",0

Query the IP address of the
server to which the time is
updated and the timeout
period, time zone, and
DTS.

AT+UPDATETIME=?

+UPDATETIME: (0-1),,(1-30),,(0-1)

Query the value range of
parameters.

Remarks



The settings by this command will not be saved after the module is powered
off.



Enable PPP link (AT+XIIC=1) before sending this command.



Send AT+CCLK? to query whether RTC is synchronized to the current network

Summary of Contents for N11 V2







































































































































Search results

Summary of Contents for N11 V2

Reviews:

Related manuals for N11 V2

Brands by name

Popular brands

Neoway N11 V2, At Command Manual

Search results

Summary of Contents for N11 V2

Reviews:

Related manuals for N11 V2

Brands by name

Popular brands