background image

Danger

If you smell flue gases:

1. Switch off the appliance.

2. Open the windows.

3. Evacuate the premises.

4. Contact a qualified professional.

Caution

Do not neglect to service the boiler. Contact a 

qualified professional or take out a maintenance 

contract for the obligatory annual servicing of the 

boiler.

Failure to service the appliance voids the warran­

ty.

Important

This manual can also be found on our internet 

site.

1.2 

Recommendations

Caution

The system must satisfy each point in the rules 

(DTU, EN and others, etc.) that govern works and 

interventions in individual homes, blocks of flats 

or other buildings.

Note

Keep the boiler accessible at all times.

Caution

Install the boiler in a frost-free environment.

Note

Regularly check the presence of water and pres­

sure in the heating installation.

Important

Never remove or cover labels and data plates af­

fixed to the appliances. Labels and data plates 

must be legible throughout the entire lifetime of 

the appliance.

Immediately replace damaged or illegible instruc­

tions and warning stickers.

Important

Remove the casing only to perform maintenance 

and repair work. Put the casing back in place af­

ter maintenance and repair work.

1  Safety

7628792 - v03 - 25072017

EF

7

Summary of Contents for EcoNox EF 22













































Reviews: