Neousys Technology POC-551VTC Series User Manual Download Page 47

Page: 47 / 113

POC-551VTC

3.2.2

mini-PCIe Module, SIM Card and Antenna Installation

There are mini-PCIe with SIM slots on MezIO

module and the motherboard.

Please follow the procedures below to install the mini-PCIe module and SIM card, as

well as the antenna for wireless communication.

Disassemble the system enclosure

2. The mini-PCIe and SIM slots are shown in the illustration below.

mini-PCIe/ SIM slot on the MezIO™

module

mini-PCIe/ SIM slot on the mainboard

3. To access the mini-PCIe slot on the mainboard, you may need to move the

MezIO™ module. To do so, remove the three screws shown below, gently wiggle

and disengaged the MezIO™ connector to separate it from the mainboard.

Summary of Contents for POC-551VTC Series


















































































































Search results

Summary of Contents for POC-551VTC Series

Reviews:

Related manuals for POC-551VTC Series

Brands by name

Popular brands

Neousys Technology POC-551VTC Series, User Manual

Search results

Summary of Contents for POC-551VTC Series

Reviews:

Related manuals for POC-551VTC Series

Brands by name

Popular brands