Nuvo-8208GC Series
73
3.4
Mounting and Anti-vibration Damping Bracket Installation
NOTE
You will need to remove the four (4) rubber stands at the bottom of the enclosure if they have
been attached.
The mounting and damping bracket offers superior operating vibration resistance up to 1Grm
with HDD or up to 5Grm with SSD. Please refer to the Nuvo-8208GC exploded illustration
below on installing damping and mounting brackets. The brackets, damping brackets and
screws can all be found in the accessory box.
1.
Take out anti-vibration damping bracket, eight M4 screws (
red
), eight sleeves (
blue
) and
ten anti-vibration grommets (
green
) from the accessory box. Insert the M4 screws into
the sleeves and through the anti-vibration grommets to secure the system to the bracket;
and the bracket on top of a flat horizontal surface.
Summary of Contents for Nuvo-8208GC Series
