Neousys Technology Nuvo-8208GC Series, User Manual, Page: 108 / 141

Nuvo-8208GC
108
4.3 RAID Configuration
To set up a RAID 0 or 1 volume in Legacy or UEFI mode, you need to have at least two hard
drives or SSDs installed. The system supports RAID configurations in RAID 0 (striping) or
RAID 1 (mirror) mode. Users can select the configuration that best suit their needs with RAID
0 (striping) mode offering better hard drive read/ write performances while RAID 1 (mirror)
offers better data security.
WARNING
Please back up hard drive data before you create or modify RAID volume(s) as the process
may cause irreversible data deletion. When creating a RAID volume, it is also recommended
to use hard drives from the same batch (same brand, model, capacity, rpm rate, etc.) to avoid
performance or capacity allocation issues.
4.3.1 Legacy Mode RAID Configuration
To set up RAID configuration, you need to pre-configure the SATA mode setting in the BIOS.
Please refer to the following steps:
1. When system boots up, press F2 to enter BIOS setup utility.
2. Go to [Advanced] > [SATA And RST Configuration] > [SATA Mode Selection] >
highlight [Intel RST Premium With Intel Optane System Acceleration] and press
ENTER.