manualshive.com logo in svg

Neousys Technology Nuvo-8208GC Series, User Manual, Page: 58 / 141

Share
Download
Neousys Technology Nuvo-8208GC Series User Manual Download Page 58

Nuvo-8208GC 

58 

3.2.4 

M.2 2242 (B Key) Module and Micro-SIM (3FF) Card Installation 

The system has an M.2 slot (indicated in 

blue

) for installing 3G/ 4G or a WiFi module that can 

be coupled with dual Micro-SIM card slots (indicated in 

red

). For installation, please refer to 

the following instructions. 

1. 

Please refer to the section “

Disassembling the System

”. 

2. 

Locate the M.2 2242 (B Key) and SIM card slots on the motherboard. 

 

3. 

Before installing the mPCIe module, you need to insert the Mini-SIM card. Slide the SIM 

slot holder and lift the SIM card holder. Insert the Mini-SIM card (pins facing up), shut the 

SIM holder and slide it to lock the SIM card in-place. 

 

 

Slide and lift SIM card holder 

Insert Mini-SIM card with pins 

facing up 

4. 

Secure the SIM card by sliding the holder. 

 

Summary of Contents for Nuvo-8208GC Series














































































































































Reviews:

No comments