Nuvo-2500 Series User’s Manual
Copyright © 2015 Neousys Technology Inc. All Right Reserved.
Page 31 of 154
2.2 Front Panel I/O Functions
2.2.1 Power Button
Figure 1: Power Button
The power button is a non-latched switch for ATX mode on/off operation. To turn on the
Nuvo-2500, press the power button and the PWR LED is lighted up. To turn off the
Nuvo-2500 you can either issue a shutdown command in OS, or just simply press the
power button. In case of system halts, you can press and hold the power button for 5
seconds to compulsorily shut down the system. Please note that a 5 seconds interval is
kept by the system between two on/off operations (i.e. once turning off the system, you
shall wait for 5 seconds to initiate another power-on operation).
2.2.2 Reset Button
Figure 2: Reset Button
The reset button is used to manually reset the system in case of any abnormal condition.
To avoid unexpected operation, the reset button is hidden behind the front panel. You need
to use a pin-like object to push the reset button.