Nuvo-2500 Series User’s Manual
Copyright © 2015 Neousys Technology Inc. All Right Reserved.
Page 92 of 154
4.1.5 Power On after Power Failure Option
This option defines the behavior of Nuvo-2500 when DC power is supplied.
To set
[Power On after Power Failure]
option:
1. When Nuvo-2500 boots up, press F2 to enter BIOS setup utility.
2. Go to
[Power]
.
3. Set the
[Power On after Power Failure]
option to a proper value for your Nuvo-2500.
Figure 75: Configuring Power on after Power Failure in BIOS
The following table describes the options of this setting.
Table 27: Options of Power On after Power Failure
Value
Description
S0 – Power On
System is powered on when DC power is supplied.
S5 – Power Off
System is kept in off state when DC power is supplied.
