Remark:-
Before pressing the “ CD tray open ” button (3) for changing disc
.
press the “ CD stop ” button (19).
-
The reaction time of the CD burner is longer than normal CD player due to the complicity of the system.
-
WARNING : DO NOT
press difference function buttons within a very short time of one another as this may cause a
mal-function of the system. Please re-start the unit if this is happens.
-
The reading and playback time of CD-R(W) disc varies from brand to brand. It depends on the compatibility of the used
disc.
-
This device only designed for normal compact disc format. It will not support MP3/WMA formats.
Repeat mode (by remote control)
Press the Repeat button before or during playback. A single track or all the tracks can be played in difference mode as
follows:-
(1) repeat all track
(2) repeat 1
(3) off mode
Indicator
Play mode
on LCD display
Repeat all
Repeat 1
Off mode
--------------
Random play mode (by remote control)
-
Pressing the Random button on the remote control will active the shuffle play function and the Random indicator “ RAN
“ will show on the LCD display (2). Press the stop button to stop the unit and cancel the random play function.
CD disc programming (by remote control)
Up to 32 tracks can be programmed for CD playing. Before use, be sure the system is at stop mode before
programming:-
1. Set in CD mode & stop the disc playback.
2. Press the “Program” button, “ Prog “ indicator will appear on the LCD display (2). It will also indicate the program no.
(P-xx) and digits for track no. to be programmed.
3. Select a desired track by pressing skip up
or down
buttons.
4. Press the “ Program ” button to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if required.
6. When all the desired tracks have been programmed, press CD “ Play/Pause
” button to play the disc in assigned
order.
7. To cancel the programmed file, press “Stop” button on the remote handset until “ Prog “ indicator disappears on the LCD
display (2).
Remark:-
-
If required, you can delete previously programmed tracks after they have been played and whilst the unit is still in
program mode. Press stop button to set the unit in stop mode first, press “ Clear “ button on your remote control one track
at a time once. The programmed track will delete one by one from the memory in the order they were originally
programmed.
-
Recording function
Apart from the CD playback function, this unit can perform the CD recording function either from Phono, Tape or Aux mode
respectively. All the recorded tracks will be stored in “
audio-CD
“ format:-
Before starting, place a blank CD-R or CD-RW disc in the CD tray (4). The disc is able to record only if the LCD display shows
“ NO TOC “.
Remark
: CD-R discs can only be recorded once and will not support erase or re-record functions.
Important notices:-
-
The revolving speed of CD burner is higher than normal CD mechanism and therefore you may detect some slight
mechanical noise and vibration of unit during this function. This is normal and not a malfunction of the system.
-
Due to the variety of quality and compatibility of CD-R(W) discs in the market, you may need to experiment with a number
of different brands before you find the most suitable.
A) Recording mode
I
) Phono recording
1)
Select the function switch (26) to “ Source ” position, then press the “ Phono “ button (25). Place the recorded vinyl on
the turntable & get ready for playback.
2)
Press “ Rec
“ button (14) and then the CD “ Play/Pause
” button (16) until the play indicator “
“ shows on the
LCD display (2).
E-3
