Neopost SI60, User Manual

Page: 19 / 87

19
4103241J-19/A
4103980D/A
28/05/2001
SECTION B : PRACTICAL FUNCTIONS
1. INSTALLATION AND PUTTING INTO SERVICE ............ 21
1.1 Installation of the feeders 21
1.2 Removal of the feeders 23
1.3 Filling the tank 23
1.4 Putting into service 23
1.4.1 User mode (access) 25
1.4.2 Language selection 25
1.4.3 Maintenance 25
1.4.4 Servicing mode (access) 25
1.4.5 Supervisor mode 26
2. OPERATION ...................................................... 27
2.1 User mode 28
2.1.1 Quick access job 28
2.1.2 Selection of a stored job 29
2.1.3 Job check 30
2.1.4 Starting the job 31
2.1.5 Modification of a job 31
2.1.6 Creation of a job 32
2.1.7 Counters 32
2.1.8 Countdown counter 33
2.2 Supervisor mode 34
2.2.1 Length of flap moistening 34
2.2.2 Adjustment of the document alignment (feeders B
and C) 35
2.3 Position of the address and adjustment of the folds 35
2.3.1 Position of the address 35
2.3.2 Adjustment of the folds 35
2.4 Detection of double documents 36
2.4.1 General remarks 36
2.4.2 Enabling and disabling the double document
detection 36
3. DOCUMENT FEEDING ......................................... 37
3.1 Document feeding in the manual mode (feeder A) 37
3.2 Document feeding in the automatic mode (feeders B and
C) 37
3.3 Envelope feeding (feeder E) 39
3.4 Feeding of inserts and reply envelopes (feeder F) 41
3.5 Feeding of inserts and reply envelopes (feeder D) 44