«Neomatica» Wireless sensor-immobilizer ADM33, edition 1.1 dd 11.11.2019
11
4.2.2.
Control of immobilizer statuses
BLEOUTPUT
command is used to switch the status of electromechanical relay or of
semiconductor switches. The data entered with the help of this command are recorded in
non-volatile memory and saved there when the power is turned off or the tracker is rebooted.
BLEOUTPUT X – set immobilizer status X
•
Status 0 (X=0)
Electromechanical relay: COM+NC outlets are closed, COM+NO outlets are open.
Semiconductor switches: off
•
Status 1 (X=1)
Electromechanical relay: COM+NC outlets are open, COM+NO outlets are closed.
Semiconductor switches: on
Example:
BLEOUTPUT 1 – set immobilizer status 1;
4.2.3.
Setting immobilizer ADM33
Use
BLEOUTCFG
command to set the immobilizer. ADM33 stops Bluetooth
environment scanning process and starts broadcasting Advertising messages.
To configure settings and select immobilizer modes use a smartphone with operation
system Android .5.0 or earlier as well as nRF Connect application. To connect the immobilizer
to the smartphone via Bluetooth do the following:
1)
Activate Bluetooth-adapter of the smartphone;
2)
Activate geolocation;
3)
Start up nRF Connect program (is available for downloading in Play Store
https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp
4)
Allow nRF Connect application to use Bluetooth and geo position;
5)
Supply power to the immobilizer;
6)
Send BLEOUTCFG command to the immobilizer from the tracker;
7)
nRF Connect will display the immobilizer in the list of detected devices;
8)
Click on the right-side button in nRF Connect;
