Neoline X-COP R750, User Manual

Page: 73 / 98

73
GPS Priority
When GPS priority is On, GPS alert priority is higher than
Radar alert
Radius of silence zone
The detection range of silence zone can be changed.
Set range : 200m/300m/400m.
Radius of User alert zone
The detection range of user alert zone can be changed.
Set range : 200m/300m/400m/500m/600m/700m/800m.
Silence mode speed setting
If car speed is lower than set level, alert voice and beep
of Radar/GPS detections are disabled.(Only GPS alert
display is enabled)
If car speed is higher than set level, the alert voice, beep
and display are enabled.
Set range : OFF/10Km/20Km…130Km
Legal overspeed setting
The set value will be added to the speed limit of GPS
POI.
Set range : 0/+5Km/+10Km/+15Km/+20Km/+25Km/+30Km
Maximum overspeed setting (change by DOWN/UP)
If car speed is higher than set value, beeping will be out
until speed is lower than set value.
Set range : OFF/80Km/90Km/100Km …. 180Km
GPS POI detection distance setting
GPS POI detection distance can be adjusted by setting
range.
When distance is set by car speed, detection distance is
as below.