23
14.2.8.
Recording Brightness
Setting the brightness of recording videol.
Setting value : 1 ~ 5 (5 is brightest)
14.2.9.
WDR (Wide Dynamic Range)
Automatic brightness setting for the display to be seen better by controlling the background
and objective brightness.
Setting value : On/Off
14.2.10.
Sensitivity(Driving)
Setting the G-Sensor sensitivity during driving.
Setting value : 1 ~ 10(10 is more sensitive)
14.2.11.
Sensitivity(Parking)
Setting the G-Sensor sensitivity at Parking mode.
Setting value : Off/1~3(3 is more sensitive)
14.2.12.
Motion detection(Parking)
1
Setting the Motion detection sensitivity at Parking mode.
Setting value : Off/1~3 (3 is more sensitive)
※ If both Sensitivity(Parking) and Motion detection(Parking) set all ‘off’, the video is to be
recorded by Driving mode.
14.2.13.
Parking mode time
At the status of Car engine ON, Setting the time when it enters into the Parking mode since
there is no movement of car.
When Car engine is off, it enters into the parking mode immediately.
Setting value : Off/1min/5min/10min/15min/20min/25min/30min
14.2.14.
Recording time (Driving)
Setting time for recording video file at the driving mode.
Setting value : 1min/2min/3min/5min
14.2.15.
Loop recording (Event)
Setting On: Event recording file will be deleted in order automatically once the file is full.
Setting Off: ‘event folder has been full’ message will be shown once the file is full and the video
will be recorded by driving mode.
1
Motion detection is the function to record the previous 10 seconds and after 50 seconds once any motion is
recognized.
